|
Transformers with Fe-Si core with particular requirements such as size, finish, pins disposal, input and output voltage. |
|
Where PCB does not allow the use of main transformers encapsulated in resin we can supply air transformers with plastic shell for the protection of windings and the improvement of creepage-clearance. |
| |
|
| |
custom (custom) transformers are manufactured according to the technical and safety requirements of the clients.
As an example, here you can find some of the most common features you can easily request: |
|
Primary and secondary windings in separate sections |
|
Encapsulation in epoxy resin or insulating varnish dipping. |
|
Hot-dip tin coated phosphor bronze pins |
|
Pin size: Max diameter = 0,90mm , Minimum lenght = 4mm |
|
5KV Primary to Secondary dielectric strength |
|
100% tested |
|
On request they can be tested to meet CEI EN61558-1(CEI 96-3) e CEI EN 61558-2-6 (CEI 96-7) safety standards. |
| |
|
